Friday June 6th, 2014


  1. Thursday October 13th, 2011 at Thursday October 13th, 2011 | #1


    I enjoyed your article on the Arduino Leonardo using the Adafruit ATmega32U4 breakout, but I was wondering how the programming/bootloader reset works.

    Does the board automatically reset and then program when the Arduino “upload” button is pressed in the IDE? (just like an Arduino Duemillinove/Uno?)


  2. Sunday October 16th, 2011 at Sunday October 16th, 2011 | #2

    Hi, Brian

    Arduino Leonardo works just like Uno and other Arduino. You need to press just “upload” button on IDE, and Arduino will take case the rest of works.


Comments are closed.